35 lines
1.1 KiB
Markdown
35 lines
1.1 KiB
Markdown
one-wire
|
|
========
|
|
|
|
Rust project for the _SparkFun ProMicro_.
|
|
|
|
## Build Instructions
|
|
1. Install prerequisites as described in the [`avr-hal` README] (`avr-gcc`, `avr-libc`, `avrdude`, [`ravedude`]).
|
|
|
|
2. Run `cargo build` to build the firmware.
|
|
|
|
3. Run `cargo run` to flash the firmware to a connected board. If `ravedude`
|
|
fails to detect your board, check its documentation at
|
|
<https://crates.io/crates/ravedude>.
|
|
|
|
4. `ravedude` will open a console session after flashing where you can interact
|
|
with the UART console of your board.
|
|
|
|
[`avr-hal` README]: https://github.com/Rahix/avr-hal#readme
|
|
[`ravedude`]: https://crates.io/crates/ravedude
|
|
|
|
## License
|
|
Licensed under either of
|
|
|
|
- Apache License, Version 2.0
|
|
([LICENSE-APACHE](LICENSE-APACHE) or <http://www.apache.org/licenses/LICENSE-2.0>)
|
|
- MIT license
|
|
([LICENSE-MIT](LICENSE-MIT) or <http://opensource.org/licenses/MIT>)
|
|
|
|
at your option.
|
|
|
|
## Contribution
|
|
Unless you explicitly state otherwise, any contribution intentionally submitted
|
|
for inclusion in the work by you, as defined in the Apache-2.0 license, shall
|
|
be dual licensed as above, without any additional terms or conditions.
|